DM Lite 4K60 4:4:4 Transmitter for HDMI and Analog Audio Signal Extension over CATx Cable, Wall Plate, Black

Model: HD-TXA-4KZ-101-1G-B

Part #: 6511919

Interoperability with a DM Lite® receiver or DMPS Lite™ switcher
Point-to-point extension of HDMI® and analog audio signals over a CAT5e or higher cable
DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
4K60 4:4:4 capability
HDR10, HDR10+, and Dolby Vision® video formats

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The HD-TXA-4KZ-101-1G is a DM Lite® 4K60 4:4:4 wall plate transmitter designed to interoperate with a DM Lite® receiver or DMPS Lite™ switcher for the transmission of HDMI® and analog audio signals. A CAT5e or higher twisted pair cable is used to connect the HD-TXA-4KZ-101-1G to the DM Lite receiver or DMPS Lite switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.

The HD-TXA-4KZ-101-1G is available in black (model HD-TXA-4KZ-101-1G-B).

Interoperability with a DM Lite Receiver or DMPS Lite Switcher

The DM Lite output port of the HD-TXA-4KZ-101-1G must be connected to a DM Lite input port of a DM Lite receiver or DMPS Lite switcher. Examples of supported DM Lite 4K60 4:4:4 receivers are the HD-RX-4KZ-101, HD-RXA-4KZ-101, HD-RXC-4KZ-101, and HD-RXCA-4KZ-101. Supported DM Lite 4K60 4:2:0 receivers are the HD-RX-101-C-E, HD-RXC-101-C-E, HD-RX-201-C-E, HD-RX-101-C-1G-E, and HD-RXC-101-C-1G-E. Supported DMPS Lite switchers are the HD-PS622, HD-PS621, HD-PS402, HD-PS401, and HD-RX-4K-210-C-E(-POE).

The HD-TXA-4KZ-101-1G can be configured and controlled only when it is used with a DMPS Lite switcher. The web interface of the switcher can be used to configure the HD-TXA-4KZ-101-1G. In addition, control system programming and .AV Framework™ software support of the HD-TXA-4KZ-101-1G is hosted by the switcher.

4K60 4:4:4 and HDR Support

The HD-TXA-4KZ-101-1G supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.

Analog Audio Embedding

The analog audio input port of the HD-TXA-4KZ-101-1G enables a balanced/unbalanced stereo audio source to be embedded with the video signal from the HDMI input. An audio selection push button is provided to switch between analog and HDMI audio inputs as desired. The audio selection push button is functional only when the HD-TXA-4KZ-101-1G is used with a DM Lite 4K60 4:4:4 receiver or a DMPS Lite HD-PS Series switcher.

One-Gang Wall Plate Design

The HD-TXA-4KZ-101-1G is designed to mount into a 1-gang U.S. electrical box or plaster ring (not included). The HD-TXA-4KZ-101-1G can receive power from the remote DM Lite receiver (surface mountable only) or DMPS Lite switcher.

Interoperability with a DM Lite® receiver or DMPS Lite™ switcher
Point-to-point extension of HDMI® and analog audio signals over a CAT5e or higher cable
DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
4K60 4:4:4 capability
HDR10, HDR10+, and Dolby Vision® video formats
Compliance with HDCP 2.3
Analog audio embedding
CEC (Consumer Electronics Control) pass-through capability
EDID pass-through capability
One-gang wall plate design with black finish
Decorator style faceplate required (FP-G Series sold separately)
Power from the remote DM Lite receiver (surface mountable only) or DMPS Lite switcher

Receiver/Transmitter Cable Type - Other
Receiver/Transmitter Format Type - HDMI
Supported Resolution - 1080i (1920x1080)
Supported Resolution - 1080p (1920x1080)
Supported Resolution - WQXGA (2560x1600)
Supported Resolution - Other
Warranty - Yes
Spec Sheet available - Yes

DC Voltage: 24 Volts
Certifications: CE, IC, FCC
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Current Draw: 0.75 Amps
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts
Transmission Range: 230 ft
Depth: 2.26 in
Height: 4.12 in
Width: 1.72 in
Product Weight: 0.34 lbs
Video:
•Output Signal Type: DM Lite® with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support
•Intput Signal Type: HDMI® with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support (DVI and Dual-Mode DisplayPort™ interface compatible compatible)4
•Copy Protection: HDCP 2.3
Audio:
•Output Signal Type: DM Lite
•Input Signal Type: HDMI, analog stereo
•Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels
•Analog Format: Stereo 2-channel
•Digital-to-Analog Conversion: 24-bit 48 kHz
•Analog Performance: Frequency Response: 20 Hz to 20 kHz ±0.5 dB; S/N Ratio: >95 dB 20 Hz to 20 kHz A-weighted; THD+N: <0.005% at 1 kHz; Stereo Separation: 80 dB
COMMUNICATIONS:
•HDMI: HDCP 2.3, EDID, CEC pass-through
•DM Lite: HDCP 2.3, EDID pass-through
Connectors:
•HDMI IN: (1) HDMI Type A connector, female; HDMI digital video/audio output; DVI compatible
•DM LITE OUT: (1) 8-pin RJ-45 yellow connector, female, shielded; DM Lite input port for connection to the DM Lite output port of a DM Lite transmitter or DMPS Lite™ switcher
•24V 1.25A: (1) 2.1 x 5.5 mm DC power connector; 24VDC power input; PW-2420RU power pack included
•AUDIO IN: (1) 5-pin 3.5 mm detachable terminal block; Balanced/unbalanced stereo line-level audio input; Input Impedance: 24k Balanced/unbalanced; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
•Ground: (1) Chassis ground lug
Controls and Indicators:
•LINK: (1) Green LED, indicates that a DM Lite link is established
•PWR: (1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational
•HDMI IN: (1) Green LED, indicates that the device is transmitting an HDMI signal
•DM LITE OUT: (2) LEDs on RJ 45 connector. Green indicates that a DM Lite link is established, Flashing amber indicates non-HDCP video, and solid amber indicates HDCP video
•AUDIO SELECT: (1) Push button, enables selection of HDMI or analog audio
•AUDIO, HDMI IN: (1) Green LED, indicates that HDMI audio is selected
•AUDIO IN: (1) Green LED, indicates that analog audio is selected
Humidity: 20% to 90% RH (non-condensing)
Construction:
•Composition: Metal housing and bracket with black polycarbonate front label overlay
•Mounting: Mounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included)
•Faceplate: Requires a decorator style faceplate (FP-G series, sold separately)

Transmitter 262504 kb - Data Sheet

Project List

Product Catalog

DM Lite 4K60 4:4:4 Transmitter for HDMI and Analog Audio Signal Extension over CATx Cable, Wall Plate, Black

Model: HD-TXA-4KZ-101-1G-B

Part #: 6511919

Our Office

Upcoming Events

About InfoCor