DM Lite® 4K60 4:4:4 Transmitter and 2x1 Auto-Switcher for HDMI®, USB-C® DisplayPort™, and USB 2.0 Signal Extension over CATx Cable

Model: HD-TXU-4KZ-211

Part #: 6511927

DM Lite® transmitter functionality designed to interoperate with a DM Lite HD-RXU-4KZ Series receiver
Point-to-point extension of an HDMI® or USB-C® DisplayPort™ signal and USB 2.0 data signals over a CAT5e or higher cable
Two inputs with automatic switching:
One HDMI input with associated USB 2.0 USB-C input
One USB-C input with DisplayPort Alt Mode capability and USB 2.0 support

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The HD-TXU-4KZ-211 is a DM Lite® 4K60 4:4:4 transmitter designed to interoperate with a DM Lite® HD-RXU-4KZ Series receiver. The paired transmitter and receiver enable extension of HDMI® or USB-C® DisplayPort™ AV signals along with USB 2.0 data. This is useful in applications where an AV source is located remotely from its destination, such as a display, projector, or codec solution. A CAT5e or higher twisted pair cable must be used to connect the HD-TXU-4KZ-211 to the DM Lite receiver.1

Interoperability with a DM Lite HD-RXU-4KZ Series Receiver

For interoperability between the HD-TXU-4KZ-211 and an HD-RXU-4KZ Series receiver, the DM Lite output port of the HD-TXU-4KZ-211 must be connected to the DM Lite input port of the HD-RXU-4KZ Series receiver.

4K60 4:4:4 and HDR Support

The HD-TXU-4KZ-211 supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.

Integrated Web Server

The HD-TXU-4KZ-211 provides an integrated web server for device configuration and management. The web server also enables device, network, and other types of status information to be viewed.

Automatic Switching of Inputs

The web interface of the HD-TXU-4KZ-211 or control system programming can be used to configure AV switching behavior. Switching between the HDMI and USB-C DisplayPort inputs occurs based on the last connected input or on the routing priority assigned to each input. In addition, input selection push buttons on the front of the HD-TXU-4KZ-211 enable the desired input to be selected manually.

USB 2.0 Data Extension

Two USB 2.0 host ports and one USB 2.0 device port are provided on the HD-TXU-4KZ-211, enabling connection to a wide variety of supported USB 2.0 peripheral devices.

Compact, Surface-Mountable Design

Compact in design, the HD-TXU-4KZ-211 can be mounted onto a flat surface such as the underside of a table, behind a credenza, or inside a podium. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD-TXU-4KZ-211 receives power from the included power pack.

DM Lite® transmitter functionality designed to interoperate with a DM Lite HD-RXU-4KZ Series receiver
Point-to-point extension of an HDMI® or USB-C® DisplayPort™ signal and USB 2.0 data signals over a CAT5e or higher cable
Two inputs with automatic switching:
One HDMI input with associated USB 2.0 USB-C input
One USB-C input with DisplayPort Alt Mode capability and USB 2.0 support
DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
4K60 4:4:4 capability
HDR10, HDR10+, and Dolby Vision® video formats
Enterprise-grade security
Compliance with HDCP 2.3
Integrated web server for device configuration and management
Automatic display control using CEC (Consumer Electronics Control)
EDID management
Interoperability with a Crestron 3-Series® or later control system
XiO Cloud® service support
.AV Framework™ technology support
Compact, surface-mountable design
Power from 24VDC power pack (included)

Receiver/Transmitter Format Type - HDMI
Receiver/Transmitter Format Type - USB
Receiver/Transmitter Format Type - Other
Supported Resolution - 1080i (1920x1080)
Supported Resolution - 1080p (1920x1080)
Supported Resolution - WQXGA (2560x1600)
Supported Resolution - Other
Warranty - Yes
Spec Sheet available - Yes

DC Voltage: 24 Volts
Color: Black
Certifications: CE, IC, FCC
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Current Draw: 2.50 Amps
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts
Depth: 6.48 in
Height: 1.20 in
Width: 8.52 in
Product Weight: 1.93 lbs
Video:
•Input Signal Types: HDMI® (DVI and Dual-Mode DisplayPort™ interface compatible5) and DM Lite® with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support
•Output Signal Type: DM Lite® with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support
•Copy Protection: HDCP 2.3
Audio:
•Input Signal Types: HDMI, DisplayPort over USB-C (DisplayPort Alt Mode)
•Output Signal Type: DM Lite
•Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels
COMMUNICATIONS:
•HDMI: HDCP 2.3, EDID, CEC
•DM Lite: HDCP 2.3, EDID; USB 2.0 up to 300 Mbps
•USB: USB signal extension via USB 2.0 host and device ports
•Ethernet: 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, Web browser setup and control, Crestron control system integration, IEEE 802.1X, Secure CIP, Authentication, SSH/SSL, TLS
•USB C: HDCP 2.3, EDID, CEC; USB 2.0 up to 300 Mbps
Connectors:
•SERVICE: (1) USB 2.0 Type-A connector, female; Used for firmware loading and configuration management; Can also provide up to 5V 500 mA power to a USB powered device
•24V 1.9A: (1) 2.1 x 5.5 mm DC power connector; 24VDC power input; PW-2420RU power pack included
•HDMI INPUT 2: (1) HDMI Type A connector, female; HDMI digital video/audio input; DVI and Dual-Mode DisplayPort interface compatible
•DEVICE INPUT 2: (1) USB Type-C® connector, female; USB 2.0 device port associated with HDMI input for AV sources that require USB 2.0 support; USB signal extender port for connection to a computer or other USB 2.0 host
•HOST: (2) USB Type-A connectors, female; USB 2.0 host ports; USB signal extender ports for connection to USB mice, keyboards, or other USB 2.0 peripheral devices; Available Power: 500 mA at 5VDC per port
•DM LITE OUT 2: (1) 8-pin RJ-45 yellow connector, female, shielded; DM Lite input port for connection to the DM Lite output port of a DM Lite HD-TXU-4KZ Series transmitter
•LAN: (1) 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T Ethernet port for device configuration and management
•Ground: (1) Chassis ground lug
•USB, INPUT 1: (1) USB Type-C® connector, female; Digital video/audio input using DisplayPort Alt Mode; USB 2.0 data support
Controls and Indicators:
•PWR: (1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational.
•AUTO: (1) Push button for enabling or disabling automatic switching of inputs; (1) LED, green indicates that automatic switching of inputs is enabled
•SETUP: (1) Push button for Ethernet setup; (1) LED, red indicates that the SETUP push button is pressed
•INPUT 1: (1) Push button for manual selection of HDMI input; (1) LED, green indicates that the HDMI input is routed to an output, and amber indicates that a source is detected but is not routed to an output
•INPUT 2: (1) Push button for manual selection of DM Lite input; (1) LED, green indicates that the DM Lite input is routed to an output, and amber indicates that a source is detected but is not routed to an output
• DM LITE OUT: (2) LEDs on RJ 45 connector. Green indicates that a DM Lite link is established; Flashing amber indicates non HDCP video, and solid amber indicates HDCP video
•LAN: (2) LEDs on RJ-45 connector; Green indicates that a 100 Mbps link is established; Solid amber indicates that a 1000 Mbps link is established; Flashing amber indicates 1000 Mbps Ethernet activity
Humidity: 20% to 90% RH (non-condensing)
Enclosure:
•Chassis: Metal, black finish, vented top, front, rear, and sides, 2 mounting brackets included
•Mounting: Freestanding, surface mountable, or attachment to a single rack rail

Transmitter 2023951 kb - Data Sheet

Project List

Transmitter 9559742 kb - Other

Project List

Product Catalog

DM Lite® 4K60 4:4:4 Transmitter and 2x1 Auto-Switcher for HDMI®, USB-C® DisplayPort™, and USB 2.0 Signal Extension over CATx Cable

Model: HD-TXU-4KZ-211

Part #: 6511927

Our Office

Upcoming Events

About InfoCor