Control Panels & Interfaces : Control Keypads : Crestron Electronics, Inc. - ZUMMESH-KP10B-GRY-S

Zum Wireless Keypad, 4-button, 100-277V, Gray Smooth

Model: ZUMMESH-KP10B-GRY-S

Part #: 6508317

AC-powered Zum™ wireless keypads
Pair and play control of one or more Zum J-Box Load Controllers
Zum Mesh peer-to-peer RF communications for easy integration into a complete standalone or networked Zum wireless lighting control solution
Choice of single rocker switch or four pushbuttons
Up to three scene presets with pushbutton version

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

An AC-powered wireless keypad for controlling Zum™ J-box load controllers.

The Zum™ wireless keypad (ZUMMESH-KP) provides control of one or more Zum J-Box Load Controllers (ZUMMESH-JBOX). It is available with either a rocker switch or pushbuttons. The rocker switch version offers simple on/off switching and dimming adjustment, with the ability to save one scene preset. The pushbutton version supports the same capabilities with three scene presets. Standard gang-box installation allows one or more units to be installed in a 3-1/2 inch (89 mm) deep electrical box (decorator-style faceplate sold separately). ZUMMESH-KP keypads are 100-277 Volts AC line powered.

Built-in Zum Mesh wireless technology affords easy “pair and play” integration as part of a complete Zum commercial room lighting system. Energy-saving options are available to enable daylighting, occupancy or vacancy sensing, and centralized monitoring and management.

Pair and Play

Designed with flexibility and ease-of-use in mind, Zum keypads are pre-programmed with “pair and play” functionality. An installer can simply install the keypad in a room along with Zum load controllers, occupancy or vacancy sensors, and a daylight sensor, set up the room with a few quick button taps, and then use the keypad to control the lights in the room – no programming required! Room setup can also be accomplished using the Zum app if the room is equipped with a Zum Network Bridge. The Zum Network Bridge also enables centralize monitoring and management via a Zum Floor Hub and Zum Wireless Gateway.

Zum Mesh Wireless Technology

Ultra-reliable Zum Mesh wireless technology provides steadfast peer-to-peer RF communications within a commercial space without the need for physical control wiring, hubs, or gateways. Employing a Wi-Fi® friendly 2.4 GHz peer-to-peer mesh network topology, nearly every Zum Mesh device acts as an “expander,” relaying wireless commands directly between Zum Mesh devices to ensure that every command reaches its intended destination without disruption.

Zum Mesh is smart! Every Zum Mesh device knows its purpose and just the right messages to communicate to other Zum Mesh devices within the space.

AC-powered Zum™ wireless keypads
Pair and play control of one or more Zum J-Box Load Controllers
Zum Mesh peer-to-peer RF communications for easy integration into a complete standalone or networked Zum wireless lighting control solution
Choice of single rocker switch or four pushbuttons
Up to three scene presets with pushbutton version
100-277 Volts AC line powered
Flying lead wiring connections
Standard 3-1/2 inch (89mm) deep electrical box installation
Matching decorator-style faceplate available separately
Meets CEC Title 24 energy efficiency standards
Meets ASHRAE 90.1 energy efficiency standards
Meets UL 916 standard for energy management equipment
ICC International energy conservation code compliant

Systems Controlled - Lighting
Spec Sheet available - Yes

Depth: 1.80 in
Height: 4.13 in
Width: 1.75 in
Product Weight: 0.31 lbs
Color: Gray
Construction: Plastic Housing and Front Face with Metal Bracket
Certifications: UL, FCC
Wireless: Yes
Number of Buttons: 4
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
AC Voltage (Minimum): 120 Volts
AC Voltage (Maximum): 277 Volts
Wireless Communications:
•RF Transceiver: 2-way RF, 2.4GHz ISM Channels 15, 20, 25, or 26 (channel auto-selected), IEEE 802.15.4 compliant
•Zum Mesh Range (Typical): 50ft (15m) indoor to nearest peer-to-peer mesh network devices, Subject to site-specific conditions and individual device capabilities
•Note: A maximum of 32 Zum Mesh wireless devices is permitted per room
Controls and Indicators:
•Buttons: ON: Press to recall the Scene 1 preset (switched loads on and dimmed loads at their saved preset dim levels [default=90%]), press and hold to raise the dimming level for all dimmable lighting loads; SCENE 2: Press to recall the Scene 2 preset (switched loads on and dimmed loads at their saved preset dim levels [default=50%]), press and hold to save a new Scene 2 preset; SCENE 3: Press to recall the Scene 3 preset (switched loads on and dimmed loads at their saved preset dim levels [default=10%]), press and hold to save a new Scene 3 preset; OFF: Press to turn all loads off, press and hold to lower the dimming level for all dimmable lighting loads; Buttons are also used for creating presets, room setup, and factory reset
Connections:
•Hot: 1x 16AWG Class 1 flying lead, black, line power input
•Neutral: 1x 16AWG Class 1 flying leads, white, neutral
•Ground: 1x 16AWG Class 1 flying lead, green, ground
Construction:
•Composition: Plastic housing and front face with metal bracket
•Mounting: Mounts in a 1-gang (or larger) 3-1/2-inch (89mm) deep electrical box (not included)
•Faceplate: Requires a decorator-style faceplate

Wireless Keypad 811836 kb - Data Sheet

Project List

Wireless Keypad 228522 kb - Other

Project List

Wireless Keypad 340127 kb - Other

Project List

Product Catalog

Zum Wireless Keypad, 4-button, 100-277V, Gray Smooth

Model: ZUMMESH-KP10B-GRY-S

Part #: 6508317

Our Office

Upcoming Events

About InfoCor